// Camera - IXUS 310 HS (Elph 500 HS / IXY 31S) - platform_camera.h // This file contains the various settings values specific to the IXUS 310 HS camera. // This file is referenced via the 'include/camera.h' file and should not be loaded directly. // If adding a new settings value put a suitable default in 'include/camera.h', // along with documentation on what the setting does and how to determine the correct value. // If the setting should not have a default value then add it in 'include/camera.h' // using the '#undef' directive along with appropriate documentation. // Override any default values with your camera specific values in this file. Try and avoid // having override values that are the same as the default value. // When overriding a setting value there are two cases: // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. // 2. If changing the value it is best to use an '#undef' directive to remove the default value // followed by a '#define' to set the new value. // When porting CHDK to a new camera, check the documentation in 'include/camera.h' // for information on each setting. If the default values are correct for your camera then // don't override them again in here. #define CAM_PROPSET 4 #define CAM_DRYOS 1 #define CAM_DRYOS_2_3_R39 1 #define CAM_DRYOS_2_3_R47 1 #define CAM_RAW_ROWPIX 4168 // Found @0xff14a2ec #define CAM_RAW_ROWS 3060 // Found @0xff14a2f0 #undef CAM_UNCACHED_BIT #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff02b914 // cropping #define CAM_JPEG_WIDTH 4016 #define CAM_JPEG_HEIGHT 3004 #define CAM_ACTIVE_AREA_X1 120 #define CAM_ACTIVE_AREA_Y1 36 #define CAM_ACTIVE_AREA_X2 4136 #define CAM_ACTIVE_AREA_Y2 3040 #undef CAM_EMUL_KEYPRESS_DURATION #define CAM_EMUL_KEYPRESS_DURATION 10 #undef CAM_USE_ZOOM_FOR_MF #define CAM_BRACKETING 1 #undef CAM_VIDEO_CONTROL #define CAM_VIDEO_QUALITY_ONLY 1 #define CAM_EXT_TV_RANGE 1 //#define CAM_EV_IN_VIDEO 1 //#define CAM_SHOW_OSD_IN_SHOOT_MENU 1 //#define CAM_QUALITY_OVERRIDE 1 #define CAM_HAS_CMOS 1 #define CAM_HAS_ND_FILTER 1 #undef CAM_HAS_ERASE_BUTTON // No erase button #undef CAM_HAS_MANUAL_FOCUS // No manual focus mode #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // Can already zoom in video, no need to unlock #undef DEFAULT_RAW_EXT #define DEFAULT_RAW_EXT 2 // use .CR2 #undef CAM_MENU_BORDERWIDTH #define CAM_MENU_BORDERWIDTH 70 // Need to leave this much border to avoid overlap with on screen buttons. #undef CAM_TS_BUTTON_BORDER #define CAM_TS_BUTTON_BORDER 60 // Define this to leave a border on each side of the palette display. Used on the IXUS 310 to // stop the palette from overlapping the on screen buttons on each side #undef CAM_DISP_ALT_TEXT // Turn off at bottom of screen in Alt mode - changes button color instead #define CAM_TOUCHSCREEN_UI 1 // Enable touch screen U/I // camera name #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData #define PARAM_DISPLAY_MODE1 60 // param number for LCD display mode when camera in playback #define PARAM_DISPLAY_MODE2 64 // param number for LCD display mode when camera in record view hold mode #undef CAM_SENSOR_BITS_PER_PIXEL #define CAM_SENSOR_BITS_PER_PIXEL 12 #undef CAM_BITMAP_PALETTE #define CAM_BITMAP_PALETTE 12 #undef CAM_USES_ASPECT_CORRECTION #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized #undef EDGE_HMARGIN #define EDGE_HMARGIN 2 // bayer sensor pattern #define cam_CFAPattern 0x02010100 // Red Green Green Blue #define CAM_DNG_EXPOSURE_BIAS 0,1 // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code) #define CAM_DNG_LENS_INFO { 43,10, 188,10, 20,10, 58,10 } // See comments in camera.h #define cam_CalibrationIlluminant1 1 #define CAM_COLORMATRIX1 \ 544808, 100000, -174047, 100000, -80399, 100000, \ -75055, 100000, 440444, 100000, 11367, 100000, \ -5801, 100000, 71589, 100000, 118914, 100000 #define CAM_ZEBRA_ASPECT_ADJUST 1 //zebra letterbox for saving memory #undef ZEBRA_HMARGIN0 #define ZEBRA_HMARGIN0 30 //this 30 rows are not used by the display buffer is 720x240 effective, no 960x270, i.e. (270-240) reduction in widht possible but not done (more difficult to manage it and slower). #define CAM_DATE_FOLDER_NAMING 1 #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1 // enable fix for camera crash at startup when opening the conf / font files // see http://chdk.setepontos.com/index.php?topic=6179.0 #define CAM_FIRMWARE_MEMINFO 1 // Use 'GetMemInfo' to get free memory size. #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer. // Used to enabled bracketing in custom timer, required on many recent cameras // see http://chdk.setepontos.com/index.php/topic,3994.405.html #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av in bracketing. #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does now work with raw define this #define DNG_VERT_RLE_BADPIXELS 1 // Enable vertical run length compression of bad pixels, reduces badpixel.bin file size by approx 45% #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware #define CHDK_COLOR_BASE 0xA2 // Start color index for CHDK colors loaded into camera palette. #define CAM_USE_COLORED_ICONS 1 // Enable using the CHDK-DE colored icons. #undef CAMERA_MIN_DIST #define CAMERA_MIN_DIST 71 // Override min subject distance #undef CAMERA_MAX_DIST #define CAMERA_MAX_DIST 125392 // Override max subject distance //----------------------------------------------------------