source: trunk/platform/sx30/platform_camera.h @ 1245

// Camera - SX30 - platform_camera.h

// This file contains the various settings values specific to the SX30 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

        #define CAM_PROPSET                                     4
        #define CAM_DRYOS                                       1
        #define CAM_DRYOS_2_3_R39                       1

        #define CAM_RAW_ROWPIX                          4464
        #define CAM_RAW_ROWS                            3276

        #define CAM_SWIVEL_SCREEN                       1
        #define CAM_ADJUSTABLE_ALT_BUTTON       1
        #undef  CAM_CAN_SD_OVER_NOT_IN_MF
        #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
        #define CAM_HAS_VIDEO_BUTTON            1
        #define CAM_VIDEO_QUALITY_ONLY          1
        #define CAM_BRACKETING                          1
        #undef  CAM_VIDEO_CONTROL
        #define CAM_MULTIPART                           1
        #define CAM_HAS_JOGDIAL                         1
        #undef  CAM_USE_ZOOM_FOR_MF
        #undef  CAM_UNCACHED_BIT                        // shut up compiler
        #define CAM_UNCACHED_BIT                        0x40000000

        #undef DEFAULT_RAW_EXT
    #define DEFAULT_RAW_EXT             2   // use .CR2 

    #undef CAM_MENU_BORDERWIDTH
    #define CAM_MENU_BORDERWIDTH        10

        // bayer sensor pattern
        #define cam_CFAPattern 0x01000201 // Green  Blue  Red  Green

        #define CAM_DNG_EXPOSURE_BIAS           0,1             // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code)

        // TODO - Still needs work 
        #define cam_CalibrationIlluminant1      1 // Daylight
        #define CAM_COLORMATRIX1                               \
          1301431, 1000000,  -469837, 1000000, -102652, 1000000, \
          -200195, 1000000,   961551, 1000000,  238645, 1000000, \
           -16441, 1000000,   142319, 1000000,  375979, 1000000

        // cropping
        #define CAM_JPEG_WIDTH                          4368
        #define CAM_JPEG_HEIGHT                         3254
        #define CAM_ACTIVE_AREA_X1                      24
        #define CAM_ACTIVE_AREA_Y1                      10
        #define CAM_ACTIVE_AREA_X2                      (CAM_RAW_ROWPIX-72)
        #define CAM_ACTIVE_AREA_Y2                      (CAM_RAW_ROWS-12)

        // camera name
        #define PARAM_CAMERA_NAME                       4 // parameter number for GetParameterData
        #undef  CAM_SENSOR_BITS_PER_PIXEL
        #define CAM_SENSOR_BITS_PER_PIXEL       12

        #define CAM_EXT_TV_RANGE                        1
        #define CAM_QUALITY_OVERRIDE            1

        // copied from the SX200 which has the same video buffer size
        #undef CAM_USES_ASPECT_CORRECTION
        #define CAM_USES_ASPECT_CORRECTION              1  //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 

    #define CAM_ZEBRA_ASPECT_ADJUST 1
    #define CAM_ZEBRA_NOBUF 1

        #undef CAM_BITMAP_PALETTE
        #define CAM_BITMAP_PALETTE              7

        //zebra letterbox for saving memory
        #undef ZEBRA_HMARGIN0
        #define ZEBRA_HMARGIN0  30 //this 30 rows are not used by the display buffer is 720x240 effective, no 960x270, i.e. (270-240) reduction in widht possible but not done (more difficult to manage it and slower).
  
        #undef EDGE_HMARGIN
        #define EDGE_HMARGIN 2
        
        #define CAM_DATE_FOLDER_NAMING  1

        #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1                               // enable fix for camera crash at startup when opening the conf / font files
                                                                                                                        // see http://chdk.setepontos.com/index.php?topic=6179.0

    #define CAM_KEY_CLICK_DELAY         150 // SX30 appears to need extra delay for clicks

    #define CAM_FIRMWARE_MEMINFO        1       // Use 'GetMemInfo' to get free memory size.

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE      // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html
        
        #define CAM_AV_OVERRIDE_IRIS_FIX        1                               // for cameras that require _MoveIrisWithAv function to override Av in bracketing.

    #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE   1       // For cameras with 'low light' mode that does now work with raw define this

//----------------------------------------------------------