| 1 | // Camera - sx230hs - platform_camera.h |
|---|
| 2 | |
|---|
| 3 | // This file contains the various settings values specific to the SX230HS camera. |
|---|
| 4 | // This file is referenced via the 'include/camera.h' file and should not be loaded directly. |
|---|
| 5 | |
|---|
| 6 | // If adding a new settings value put a suitable default in 'include/camera.h', |
|---|
| 7 | // along with documentation on what the setting does and how to determine the correct value. |
|---|
| 8 | // If the setting should not have a default value then add it in 'include/camera.h' |
|---|
| 9 | // using the '#undef' directive along with appropriate documentation. |
|---|
| 10 | |
|---|
| 11 | // Override any default values with your camera specific values in this file. Try and avoid |
|---|
| 12 | // having override values that are the same as the default value. |
|---|
| 13 | |
|---|
| 14 | // When overriding a setting value there are two cases: |
|---|
| 15 | // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. |
|---|
| 16 | // 2. If changing the value it is best to use an '#undef' directive to remove the default value |
|---|
| 17 | // followed by a '#define' to set the new value. |
|---|
| 18 | |
|---|
| 19 | // When porting CHDK to a new camera, check the documentation in 'include/camera.h' |
|---|
| 20 | // for information on each setting. If the default values are correct for your camera then |
|---|
| 21 | // don't override them again in here. |
|---|
| 22 | |
|---|
| 23 | #define OPT_GPS 1 |
|---|
| 24 | |
|---|
| 25 | #define CAM_DRYOS_2_3_R47 1 |
|---|
| 26 | #define CAM_DETECT_SCREEN_ERASE 1 |
|---|
| 27 | #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 |
|---|
| 28 | #define DNG_VERT_RLE_BADPIXELS 1 |
|---|
| 29 | #define CAM_AV_OVERRIDE_IRIS_FIX 1 |
|---|
| 30 | #define CAM_KEY_CLICK_DELAY 150 |
|---|
| 31 | #define CAM_ADJUSTABLE_ALT_BUTTON 1 |
|---|
| 32 | #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 |
|---|
| 33 | |
|---|
| 34 | #define CAM_DRYOS_2_3_R39 1 |
|---|
| 35 | #define CAM_PROPSET 4 |
|---|
| 36 | #define CAM_DATE_FOLDER_NAMING 1 |
|---|
| 37 | #define CAM_DRYOS 1 |
|---|
| 38 | #define CAM_RAW_ROWPIX 4168 // Found @0xff1565dc |
|---|
| 39 | #define CAM_RAW_ROWS 3060 // Found @0xff1565e0 |
|---|
| 40 | |
|---|
| 41 | #define CAM_HAS_CMOS 1 |
|---|
| 42 | #define CAM_HAS_ND_FILTER 1 |
|---|
| 43 | |
|---|
| 44 | #undef CAM_CAN_SD_OVER_NOT_IN_MF |
|---|
| 45 | #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO |
|---|
| 46 | #define CAM_HAS_VIDEO_BUTTON 1 |
|---|
| 47 | #define CAM_VIDEO_QUALITY_ONLY 1 |
|---|
| 48 | |
|---|
| 49 | #undef CAM_VIDEO_CONTROL |
|---|
| 50 | |
|---|
| 51 | #define CAM_HAS_JOGDIAL 1 |
|---|
| 52 | #undef CAM_USE_ZOOM_FOR_MF |
|---|
| 53 | #undef CAM_UNCACHED_BIT |
|---|
| 54 | #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff02bcc0 |
|---|
| 55 | |
|---|
| 56 | #define CAM_DNG_LENS_INFO { 50,10, 700,10, 31,10, 59,10 } // See comments in camera.h |
|---|
| 57 | #define cam_CFAPattern 0x02010100 //Green Blue Red Green |
|---|
| 58 | |
|---|
| 59 | #define CAM_COLORMATRIX1 \ |
|---|
| 60 | 544808, 1000000, -174047, 1000000, -80399, 1000000, \ |
|---|
| 61 | -75055, 1000000, 440444, 1000000, 11367, 1000000, \ |
|---|
| 62 | -5801, 1000000, 71589, 1000000, 118914, 1000000 |
|---|
| 63 | |
|---|
| 64 | #define cam_CalibrationIlluminant1 1 |
|---|
| 65 | |
|---|
| 66 | #define CAM_JPEG_WIDTH 4000 |
|---|
| 67 | #define CAM_JPEG_HEIGHT 3000 |
|---|
| 68 | |
|---|
| 69 | #define CAM_ACTIVE_AREA_X1 96 |
|---|
| 70 | #define CAM_ACTIVE_AREA_Y1 24 |
|---|
| 71 | #define CAM_ACTIVE_AREA_X2 4168 |
|---|
| 72 | #define CAM_ACTIVE_AREA_Y2 3060 |
|---|
| 73 | |
|---|
| 74 | #define PARAM_CAMERA_NAME 4 |
|---|
| 75 | #undef CAM_SENSOR_BITS_PER_PIXEL |
|---|
| 76 | #define CAM_SENSOR_BITS_PER_PIXEL 12 |
|---|
| 77 | |
|---|
| 78 | #define CAM_EXT_TV_RANGE 1 |
|---|
| 79 | |
|---|
| 80 | #undef CAM_BITMAP_PALETTE |
|---|
| 81 | #define CAM_BITMAP_PALETTE 9 |
|---|
| 82 | #undef CAM_HAS_ERASE_BUTTON |
|---|
| 83 | #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 |
|---|
| 84 | |
|---|
| 85 | #define CAM_HAS_VARIABLE_ASPECT 1 |
|---|
| 86 | #undef CAM_USES_ASPECT_CORRECTION |
|---|
| 87 | #define CAM_USES_ASPECT_CORRECTION 1 |
|---|
| 88 | #undef CAM_SCREEN_WIDTH |
|---|
| 89 | #undef CAM_BITMAP_WIDTH |
|---|
| 90 | #undef CAM_BITMAP_HEIGHT |
|---|
| 91 | #define CAM_SCREEN_WIDTH 480 // Width of bitmap screen in CHDK co-ordinates |
|---|
| 92 | #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes |
|---|
| 93 | #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows |
|---|
| 94 | |
|---|
| 95 | #undef EDGE_HMARGIN |
|---|
| 96 | #define EDGE_HMARGIN 10 |
|---|
| 97 | |
|---|
| 98 | #undef ZEBRA_HMARGIN0 |
|---|
| 99 | #define ZEBRA_HMARGIN0 30 |
|---|
| 100 | |
|---|
| 101 | #define CAM_ZEBRA_ASPECT_ADJUST 1 |
|---|
| 102 | #define CAM_ZEBRA_NOBUF 1 |
|---|
| 103 | |
|---|
| 104 | #define CAM_QUALITY_OVERRIDE 1 |
|---|
| 105 | #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1 |
|---|
| 106 | |
|---|
| 107 | #define CAM_USE_COLORED_ICONS 1 // Enable using the CHDK-DE colored icons. |
|---|
| 108 | |
|---|
| 109 | #define REMOTE_SYNC_STATUS_LED 0xC0220130 // specifies an LED that turns on while camera waits for USB remote to sync |
|---|
