source: trunk/platform/sx200is/platform_camera.h @ 1858

// Camera - sx200is - platform_camera.h

// This file contains the various settings values specific to the sx200is camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                     2
    #define CAM_DRYOS                       1

    #define CAM_RAW_ROWPIX                  4080    // from calcs see 100C lib.c
    #define CAM_RAW_ROWS                    3048    //  "     "    "    "    "

    #undef  CAM_CAN_SD_OVER_NOT_IN_MF

    #define CAM_VIDEO_QUALITY_ONLY          1

    #undef  CAM_VIDEO_CONTROL
    #define CAM_MULTIPART                   1
    #define CAM_HAS_JOGDIAL                 1
    #undef  CAM_USE_ZOOM_FOR_MF
    #undef  CAM_UNCACHED_BIT                        // shut up compiler
    #define CAM_UNCACHED_BIT                0x40000000

    #define CAM_DNG_LENS_INFO               { 50,10, 600,10, 34,10, 53,10 } // See comments in camera.h
    // pattern
    #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
    // color
    //need fixing *****************************************************
    #define CAM_COLORMATRIX1                              \
      14134, 1000000,   -5576, 1000000,   -1527, 1000000, \
      -1991, 1000000,   10719, 1000000,    1273, 1000000, \
      -1158, 1000000,    1929, 1000000,    3581, 1000000

    #define cam_CalibrationIlluminant1      17      // Standard Light A
    // cropping
    #define CAM_JPEG_WIDTH                  4000
    #define CAM_JPEG_HEIGHT                 3000
    #define CAM_ACTIVE_AREA_X1              52
    #define CAM_ACTIVE_AREA_Y1              14
    #define CAM_ACTIVE_AREA_X2              4052
    #define CAM_ACTIVE_AREA_Y2              3014
    // camera name
    #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData

    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL   12

    #define CAM_EXT_TV_RANGE            1
    #undef  CAM_BITMAP_PALETTE
    #define CAM_BITMAP_PALETTE              3
    #undef  CAM_HAS_ERASE_BUTTON
    #define CAM_SHOW_OSD_IN_SHOOT_MENU      1
    #undef CAM_BITMAP_WIDTH
    #undef CAM_BITMAP_HEIGHT
    #define CAM_BITMAP_WIDTH                960 // Actual width of bitmap screen in bytes
    #define CAM_BITMAP_HEIGHT               270 // Actual height of bitmap screen in rows

    #undef  CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION      1       //camera uses the modified graphics primitives to map screens an viewports to buffers more sized

    #undef  EDGE_HMARGIN
#if defined(OPT_CHDK_IN_EXMEM)
    #define EDGE_HMARGIN                    0
#else
    #define EDGE_HMARGIN                    20
#endif

    #define CAM_QUALITY_OVERRIDE            1
    #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1

    #define CAM_ZEBRA_ASPECT_ADJUST         1

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1   // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html
        #define REMOTE_SYNC_STATUS_LED  0xC0220138              // specifies an LED that turns on while camera waits for USB remote to sync

    #undef  CAMERA_MIN_DIST
    #define CAMERA_MIN_DIST                 58      // Override min subject distance
    #undef  CAMERA_MAX_DIST
    #define CAMERA_MAX_DIST                 68447   // Override max subject distance

    #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1
//----------------------------------------------------------