source: trunk/platform/sx130is/platform_camera.h @ 1258

// Camera - SX130IS - platform_camera.h

// This file contains the various settings values specific to the SX130IS camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

     #define CAM_PROPSET                                 4
     #define CAM_DRYOS                                   1
     #define CAM_DRYOS_2_3_R39                           1
 
     #define CAM_RAW_ROWPIX                              4080
     #define CAM_RAW_ROWS                                3048
 
     #undef  CAM_CAN_SD_OVER_NOT_IN_MF
     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
     //#define CAM_HAS_VIDEO_BUTTON                        0
     #define CAM_VIDEO_QUALITY_ONLY                      1
     #define CAM_BRACKETING                              1
     #undef  CAM_VIDEO_CONTROL
     #define CAM_MULTIPART                               1
     #define CAM_HAS_JOGDIAL                             1
     #undef  CAM_USE_ZOOM_FOR_MF
     #undef  CAM_UNCACHED_BIT
     #define CAM_UNCACHED_BIT                            0x40000000
 
     #define DNG_SUPPORT                                 1
     // pattern
     #define cam_CFAPattern                              0x02010100 // Red  Green  Green  Blue
     // color
     #define CAM_COLORMATRIX1                               \
       827547, 1000000, -290458, 1000000, -126086, 1000000, \
       -12829, 1000000,  530507, 1000000,   50537, 1000000, \
         5181, 1000000,   48183, 1000000,  245014, 1000000
     #define cam_CalibrationIlluminant1                  1 // Daylight
 
     // cropping
     #define CAM_JPEG_WIDTH                              4000
     #define CAM_JPEG_HEIGHT                             3000
     #define CAM_ACTIVE_AREA_X1                          36
     #define CAM_ACTIVE_AREA_Y1                          20
     #define CAM_ACTIVE_AREA_X2                          4036
     #define CAM_ACTIVE_AREA_Y2                          3020
     // camera name
     #define PARAM_CAMERA_NAME                           4 // parameter number for GetParameterData
     #undef  CAM_SENSOR_BITS_PER_PIXEL
     #define CAM_SENSOR_BITS_PER_PIXEL                   12
 
     #define CAM_EXT_TV_RANGE                            1
     #define CAM_QUALITY_OVERRIDE                        1
 
     // copied from the SX200 which has the same video buffer size
     #undef CAM_USES_ASPECT_CORRECTION
     #define CAM_USES_ASPECT_CORRECTION                  1  //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 
 
     #define CAM_ZEBRA_ASPECT_ADJUST                     1
     #define CAM_ZEBRA_NOBUF                             1
 
     #undef CAM_BITMAP_PALETTE
     #define CAM_BITMAP_PALETTE                          7
 
     //zebra letterbox for saving memory
     #undef ZEBRA_HMARGIN0
     #define ZEBRA_HMARGIN0                              30 //this 30 rows are not used by the display buffer is 720x240 effective, no 960x270, i.e. (270-240) reduction in widht possible but not done (more difficult to manage it and slower).
 
     //#undef EDGE_HMARGIN
     //#define EDGE_HMARGIN                                28
     #define CAM_CHDK_PTP 1     
     #define CAM_DATE_FOLDER_NAMING                      1
 
     // Menu width like in g11 and s90
     #undef CAM_MENU_BORDERWIDTH
     #define CAM_MENU_BORDERWIDTH                        10
     // CR2 accesible through USB 
     #undef DEFAULT_RAW_EXT
     #define DEFAULT_RAW_EXT                             2

        #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1                               // enable fix for camera crash at startup when opening the conf / font files
                                                                                                                        // see http://chdk.setepontos.com/index.php?topic=6179.0

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE      // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html

        #define CAM_DETECT_SCREEN_ERASE     1       // Turn on guard pixels to detect screen erase and redraw CHDK buttons and menus
     
 //----------------------------------------------------------