source: trunk/platform/ixus310_elph500hs/platform_camera.h @ 1555

// Camera - IXUS 310 HS (Elph 500 HS / IXY 31S) - platform_camera.h

// This file contains the various settings values specific to the IXUS 310 HS camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                     4
    #define CAM_DRYOS                       1
    #define CAM_DRYOS_2_3_R39               1
    #define CAM_DRYOS_2_3_R47               1

    #define CAM_RAW_ROWPIX                  4168 // Found @0xff14a2ec
    #define CAM_RAW_ROWS                    3060 // Found @0xff14a2f0
    #undef  CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff02b914

    // cropping
    #define CAM_JPEG_WIDTH                  4016
    #define CAM_JPEG_HEIGHT                 3004
    #define CAM_ACTIVE_AREA_X1              120
    #define CAM_ACTIVE_AREA_Y1              36
    #define CAM_ACTIVE_AREA_X2              4136
    #define CAM_ACTIVE_AREA_Y2              3040

    #undef  CAM_EMUL_KEYPRESS_DURATION
    #define CAM_EMUL_KEYPRESS_DURATION      10
    #undef  CAM_USE_ZOOM_FOR_MF
    #define CAM_BRACKETING                  1
    #undef  CAM_VIDEO_CONTROL
    #define CAM_VIDEO_QUALITY_ONLY          1
    #define CAM_EXT_TV_RANGE                1

    #define CAM_HAS_ND_FILTER               1

    #undef  CAM_HAS_ERASE_BUTTON                // No erase button
    #undef  CAM_HAS_MANUAL_FOCUS                // No manual focus mode

    #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // Can already zoom in video, no need to unlock

    #undef DEFAULT_RAW_EXT
    #define DEFAULT_RAW_EXT                 2   // use .CR2 

    #undef CAM_MENU_BORDERWIDTH
    #define CAM_MENU_BORDERWIDTH            70  // Need to leave this much border to avoid overlap with on screen buttons.
    #undef CAM_TS_BUTTON_BORDER
    #define CAM_TS_BUTTON_BORDER            60  // Define this to leave a border on each side of the palette display. Used on the IXUS 310 to
                                                // stop the palette from overlapping the on screen buttons on each side
    #undef CAM_DISP_ALT_TEXT                    // Turn off <ALT> at bottom of screen in Alt mode - changes button color instead
    #define CAM_DETECT_SCREEN_ERASE         1   // Turn on guard pixels to detect screen erase and redraw CHDK buttons and menus
    #define CAM_TOUCHSCREEN_UI              1   // Enable touch screen U/I

    // camera name
    #define PARAM_CAMERA_NAME               4   // parameter number for GetParameterData
    #define PARAM_DISPLAY_MODE1             60 // param number for LCD display mode when camera in playback
    #define PARAM_DISPLAY_MODE2             64  // param number for LCD display mode when camera in record view hold mode
    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL       12

    #undef CAM_BITMAP_PALETTE
    #define CAM_BITMAP_PALETTE              12

    #undef CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION      1   //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
    #undef CAM_SCREEN_WIDTH
    #undef CAM_BITMAP_WIDTH
    #undef CAM_BITMAP_HEIGHT
    #define CAM_SCREEN_WIDTH                480 // Width of bitmap screen in CHDK co-ordinates
    #define CAM_BITMAP_WIDTH                960 // Actual width of bitmap screen in bytes
    #define CAM_BITMAP_HEIGHT               270 // Actual height of bitmap screen in rows

    #undef EDGE_HMARGIN
    #define EDGE_HMARGIN                    2

    // bayer sensor pattern
    #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue

    #define CAM_DNG_EXPOSURE_BIAS           0,1        // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code)

    #define CAM_DNG_LENS_INFO               { 43,10, 188,10, 20,10, 58,10 }    // See comments in camera.h

    #define cam_CalibrationIlluminant1      1
    #define CAM_COLORMATRIX1    \
    544808, 100000, -174047, 100000, -80399, 100000, \
    -75055, 100000,  440444, 100000,  11367, 100000, \
     -5801, 100000,   71589, 100000, 118914, 100000
    
    #define CAM_ZEBRA_ASPECT_ADJUST         1

    //zebra letterbox for saving memory
    #undef ZEBRA_HMARGIN0
    #define ZEBRA_HMARGIN0                  30 //this 30 rows are not used by the display buffer is 720x240 effective, no 960x270, i.e. (270-240) reduction in widht possible but not done (more difficult to manage it and slower).
    
    #define CAM_DATE_FOLDER_NAMING          1

    #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1   // enable fix for camera crash at startup when opening the conf / font files
                                                // see http://chdk.setepontos.com/index.php?topic=6179.0

    #define CAM_FIRMWARE_MEMINFO            1   // Use 'GetMemInfo' to get free memory size.

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1   // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html

    #define CAM_AV_OVERRIDE_IRIS_FIX        1   // for cameras that require _MoveIrisWithAv function to override Av in bracketing.

    #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1       // For cameras with 'low light' mode that does now work with raw define this

    #define CAM_LOAD_CUSTOM_COLORS          1       // Enable loading CHDK colors into the camera palette memory/hardware
    #define CHDK_COLOR_BASE                 0xA2    // Start color index for CHDK colors loaded into camera palette.
    #define CAM_USE_COLORED_ICONS           1       // Enable using the CHDK-DE colored icons.

//      #define REMOTE_SYNC_STATUS_LED  0xC0xxyyyy              // specifies an LED that turns on while camera waits for USB remote to sync
        
//----------------------------------------------------------