source: trunk/platform/g12/platform_camera.h @ 1213

// Camera - G12 - platform_camera.h

// This file contains the various settings values specific to the G12 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                 4
    #define CAM_DRYOS                   1
    #define CAM_DRYOS_2_3_R39                   1

    #define CAM_RAW_ROWPIX              3744
    #define CAM_RAW_ROWS                2784

        #define CAM_SWIVEL_SCREEN                       1

    #undef  CAM_EMUL_KEYPRESS_DURATION
    #define CAM_EMUL_KEYPRESS_DURATION  10
    #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
    #define CAM_MULTIPART               1
    #define CAM_HAS_JOGDIAL             1
        #undef  CAM_USE_ZOOM_FOR_MF
    #define CAM_HAS_ND_FILTER               1
    #define CAM_BRACKETING              1
        #undef  CAM_VIDEO_CONTROL
        #define CAM_VIDEO_QUALITY_ONLY          1
    #define CAM_EXT_TV_RANGE            1
        #define CAM_QUALITY_OVERRIDE 1
    #undef CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT            0x40000000  // S90 @FF8875FC(via ExMem.FreeCacheable)
        #define CAM_SHOW_OSD_IN_SHOOT_MENU  1

        #undef DEFAULT_RAW_EXT
    #define DEFAULT_RAW_EXT             2   // use .CR2 

    #undef CAM_MENU_BORDERWIDTH
    #define CAM_MENU_BORDERWIDTH        10

    // camera name
    #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL   12

    #undef CAM_BITMAP_PALETTE
    #define CAM_BITMAP_PALETTE    7

    #undef CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION  1  //camera uses the modified graphics primitives to map screens an viewports to buffers more sized

    #undef EDGE_HMARGIN
    #define EDGE_HMARGIN 2

    // bayer sensor pattern
    #define cam_CFAPattern 0x02010100 // Red  Green  Green  Blue

        #define CAM_DNG_EXPOSURE_BIAS           0,1             // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code)

        //need fixing *****************************************************
    #define cam_CalibrationIlluminant1  17              // Standard Light A
/*
    #define CAM_COLORMATRIX1                               \
      14134, 100000, -5576, 100000, -1527, 100000, \
      -1991, 100000, 10719, 100000,  1273, 100000, \
      -1158, 100000,  1929, 100000,  3581, 100000
*/
    // From dcraw
    #define CAM_COLORMATRIX1                       \
      13244, 10000, -5501, 10000, -1248, 10000, \
      -1508, 10000,  9858, 10000,  1935, 10000, \
       -270, 10000,  1083, 10000,  4366, 10000

    // cropping
    #define CAM_JPEG_WIDTH  3684
    #define CAM_JPEG_HEIGHT 2760
    #define CAM_ACTIVE_AREA_X1 52
    #define CAM_ACTIVE_AREA_Y1 12
    #define CAM_ACTIVE_AREA_X2 (CAM_RAW_ROWPIX-8)
    #define CAM_ACTIVE_AREA_Y2 (CAM_RAW_ROWS-12)

        #define CAM_ZEBRA_ASPECT_ADJUST 1

        //zebra letterbox for saving memory
        #undef ZEBRA_HMARGIN0
        #define ZEBRA_HMARGIN0  30 //this 30 rows are not used by the display buffer is 720x240 effective, no 960x270, i.e. (270-240) reduction in widht possible but not done (more difficult to manage it and slower).
        
        #define CAM_DATE_FOLDER_NAMING  1

        #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1                               // enable fix for camera crash at startup when opening the conf / font files
                                                                                                                        // see http://chdk.setepontos.com/index.php?topic=6179.0

    #define CAM_FIRMWARE_MEMINFO    1       // Use 'GetMemInfo' to get free memory size.

//----------------------------------------------------------