// Camera - G11 - platform_camera.h

// This file contains the various settings values specific to the G11 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_DRYOS_2_3_R39			1
    #define CAM_PROPSET                 3
    #define CAM_DRYOS                   1
    #undef  CAM_USE_ZOOM_FOR_MF
    #define CAM_HAS_ND_FILTER           1
    #define CAM_RAW_ROWPIX              3744   // See g11 lib.c
    #define CAM_RAW_ROWS                2784   // See g11 lib.c
    #undef  CAM_EMUL_KEYPRESS_DURATION
    #define CAM_EMUL_KEYPRESS_DURATION  10

	#define CAM_ADJUSTABLE_ALT_BUTTON 1
	
    #undef CAM_MENU_BORDERWIDTH
    #define CAM_MENU_BORDERWIDTH	10

	#define CAM_QUALITY_OVERRIDE 1
    #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
    #define CAM_HAS_JOGDIAL             1
    #undef  CAM_CONSOLE_LOG_ENABLED         // Development: internal camera stdout -> A/stdout.txt
    #define CAM_BRACKETING              1
    #define CAM_MULTIPART               1
    #define CAM_EXT_TV_RANGE            1
    #undef OPT_CURVES
    #undef CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT            0x40000000  // G11 @FF888204(via ExMem.FreeCacheable)

	#define CAM_SWIVEL_SCREEN			1
	#define CAM_SHOW_OSD_IN_SHOOT_MENU  1

    // camera name
    #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL   12

    #undef CAM_USES_ASPECT_CORRECTION   
    #define CAM_USES_ASPECT_CORRECTION  1  //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 
    #undef CAM_BITMAP_WIDTH
    #undef CAM_BITMAP_HEIGHT
    #define CAM_BITMAP_WIDTH                960 // Actual width of bitmap screen in bytes
    #define CAM_BITMAP_HEIGHT               270 // Actual height of bitmap screen in rows

    #undef CAM_BITMAP_PALETTE
    #define CAM_BITMAP_PALETTE    4

    #undef EDGE_HMARGIN 
    #define EDGE_HMARGIN 28

    #define CAM_DNG_LENS_INFO               { 61,10, 305,10, 28,10, 45,10 } // See comments in camera.h
	/**** From SX200IS, ok for G11 ?*/
    // pattern
    #define cam_CFAPattern 0x02010100 // Red  Green  Green  Blue
    // color
    //need fixing *****************************************************
    #define CAM_COLORMATRIX1                               \
      14134, 1000000, -5576, 1000000, -1527, 1000000, \
     -1991,  1000000, 10719,  1000000, 1273,   1000000, \
      -1158,   1000000, 1929,   1000000, 3581,  1000000
    #define cam_CalibrationIlluminant1 17 // Standard Light A

    // cropping
	//g11 values from Amit Talwar
    #define CAM_JPEG_WIDTH  3648
    #define CAM_JPEG_HEIGHT 2736
    #define CAM_ACTIVE_AREA_X1 16
    #define CAM_ACTIVE_AREA_Y1 8
    #define CAM_ACTIVE_AREA_X2 3692
    #define CAM_ACTIVE_AREA_Y2 2776
	
	/**** From SX200IS, ok for G11 END?*/
    #define CAM_ZEBRA_ASPECT_ADJUST 1

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE      // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html

//----------------------------------------------------------