// Camera - D10 - platform_camera.h

// This file contains the various settings values specific to the D10 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                 2
    #define CAM_DRYOS                   1

    #define CAM_RAW_ROWPIX              4104		// 12 MP 12bpp
    #define CAM_RAW_ROWS                3048		// from " CrwAddress %lx, CrwSize H %ld V %ld\r"

    #undef  CAM_HAS_ERASE_BUTTON
    #undef  CAM_USE_ZOOM_FOR_MF
    #define CAM_MULTIPART               1
    #undef  CAM_HAS_IRIS_DIAPHRAGM
    #define CAM_HAS_ND_FILTER           1

    #define CAM_HAS_ZOOM_LEVER          1 // note, has zoom in/out buttons, not lever


// TODO
//    #define CAM_CAN_SD_OVER_NOT_IN_MF   1			// Camera allows subject distance (focus) override when not in manual focus mode
//    #define CAM_CAN_SD_OVERRIDE         1			// Camera allows to do subject distance override

    #define CAM_HAS_MANUAL_FOCUS		1
// long shutter is acutally user TV, may work ?
    #undef 	CAM_HAS_USER_TV_MODES
    #define CAM_SHOW_OSD_IN_SHOOT_MENU            1
    #define CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO  1
    #define CAM_DETECT_SCREEN_ERASE               1
// TODO this doesn't seem to be working
    #define CAM_AF_SCAN_DURING_VIDEO_RECORD       1
    #define CAM_CHDK_HAS_EXT_VIDEO_MENU   1 // In CHDK for this camera realized adjustable video compression

    #define CAM_HAS_IS                  1
    #undef CAM_HAS_JOGDIAL

    #undef  CAM_VIDEO_CONTROL
    #define CAM_VIDEO_QUALITY_ONLY      1


    #define CAM_EXT_TV_RANGE            1

    #undef CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT            0x40000000

    #undef CAM_BITMAP_PALETTE
// OK looks similar to ixus100 based on forum posts
    #define CAM_BITMAP_PALETTE          5

    #define CAM_QUALITY_OVERRIDE 1
    #undef CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL   12

    #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1

    #define CAM_DNG_LENS_INFO               { 62,10, 186,10, 28,10, 49,10 } // See comments in camera.h

	#define cam_CFAPattern 0x01000201 // Green  Blue  Red  Green 

    #define CAM_COLORMATRIX1                               \
      14052, 10000, -5229, 10000, -1156, 10000, \
      -1325, 10000,  9420, 10000,  2252, 10000, \
       -498, 10000,  1957, 10000,  4116, 10000
    #define cam_CalibrationIlluminant1  21			// D65

	// cropping OK
    #define CAM_JPEG_WIDTH              4000
    #define CAM_JPEG_HEIGHT             3000
    #define CAM_ACTIVE_AREA_X1          0 // some data all the way to left, normal 8 ?
    #define CAM_ACTIVE_AREA_Y1          10
    #define CAM_ACTIVE_AREA_X2          4072 // or 4024 
    #define CAM_ACTIVE_AREA_Y2          3040 // or 3041 or 3020

    // camera name OK
    #define PARAM_CAMERA_NAME           4			// parameter number for GetParameterData

    // XXXX
    #undef CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION		1  //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 

    #define CAM_ZEBRA_ASPECT_ADJUST 1

    #define  CAM_CHDK_PTP               1 // include CHDK PTP support

    #define CAM_FIRMWARE_MEMINFO    1       // Use 'GetMemInfo' to get free memory size.

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE      // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html

//----------------------------------------------------------