| 1 | // Camera - a800 - platform_camera.h |
|---|
| 2 | |
|---|
| 3 | // This file contains the various settings values specific to the a800 camera. |
|---|
| 4 | // This file is referenced via the 'include/camera.h' file and should not be loaded directly. |
|---|
| 5 | |
|---|
| 6 | // If adding a new settings value put a suitable default in 'include/camera.h', |
|---|
| 7 | // along with documentation on what the setting does and how to determine the correct value. |
|---|
| 8 | // If the setting should not have a default value then add it in 'include/camera.h' |
|---|
| 9 | // using the '#undef' directive along with appropriate documentation. |
|---|
| 10 | |
|---|
| 11 | // Override any default values with your camera specific values in this file. Try and avoid |
|---|
| 12 | // having override values that are the same as the default value. |
|---|
| 13 | |
|---|
| 14 | // When overriding a setting value there are two cases: |
|---|
| 15 | // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. |
|---|
| 16 | // 2. If changing the value it is best to use an '#undef' directive to remove the default value |
|---|
| 17 | // followed by a '#define' to set the new value. |
|---|
| 18 | |
|---|
| 19 | // When porting CHDK to a new camera, check the documentation in 'include/camera.h' |
|---|
| 20 | // for information on each setting. If the default values are correct for your camera then |
|---|
| 21 | // don't override them again in here. |
|---|
| 22 | |
|---|
| 23 | #define CAM_PROPSET 4 //processor DIGIC III, but release date (Phil) and properties like PROPCASE_OPTICAL_ZOOM_POSITION, PROPCASE_SHOOTING,PROPCASE_IS_FLASH_READY as propset4.h |
|---|
| 24 | #define CAM_DRYOS 1 |
|---|
| 25 | #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher |
|---|
| 26 | #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher |
|---|
| 27 | |
|---|
| 28 | #define CAM_RAW_ROWPIX 3720 //do stub_entry.S |
|---|
| 29 | #define CAM_RAW_ROWS 2772 //do stub_entry.S |
|---|
| 30 | #undef CAM_UNCACHED_BIT |
|---|
| 31 | #define CAM_UNCACHED_BIT 0x10000000 // Found @0xffc29904 |
|---|
| 32 | |
|---|
| 33 | |
|---|
| 34 | #undef CAM_USE_ZOOM_FOR_MF //zoom with buton and not lever |
|---|
| 35 | #undef CAM_HAS_ERASE_BUTTON |
|---|
| 36 | #undef CAM_HAS_IRIS_DIAPHRAGM |
|---|
| 37 | #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 |
|---|
| 38 | #define CAM_HAS_ND_FILTER 1 |
|---|
| 39 | #undef CAM_HAS_MANUAL_FOCUS |
|---|
| 40 | #undef CAM_HAS_USER_TV_MODES |
|---|
| 41 | #undef CAM_HAS_IS |
|---|
| 42 | #define CAM_MULTIPART 1 |
|---|
| 43 | #undef CAM_VIDEO_CONTROL |
|---|
| 44 | #define CAM_REAR_CURTAIN 1 |
|---|
| 45 | #undef DEFAULT_RAW_EXT |
|---|
| 46 | #define DEFAULT_RAW_EXT 2 // use .CR2 |
|---|
| 47 | #define CAM_EXT_TV_RANGE 1 |
|---|
| 48 | #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1 |
|---|
| 49 | #define CAM_CAN_MUTE_MICROPHONE 1 |
|---|
| 50 | #define CAM_EV_IN_VIDEO 1 |
|---|
| 51 | #define CAM_QUALITY_OVERRIDE 1 |
|---|
| 52 | |
|---|
| 53 | #undef CAM_BITMAP_PALETTE |
|---|
| 54 | #define CAM_BITMAP_PALETTE 8 |
|---|
| 55 | |
|---|
| 56 | #define CAM_DNG_LENS_INFO { 66,10, 216,10, 30,10, 58,10 } // See comments in camera.h |
|---|
| 57 | // pattern |
|---|
| 58 | #define cam_CFAPattern 0x02010100 // Red Green Green Blue |
|---|
| 59 | // color |
|---|
| 60 | |
|---|
| 61 | #define CAM_COLORMATRIX1 \ |
|---|
| 62 | 827547, 1000000, -290458, 1000000, -126086, 1000000, \ |
|---|
| 63 | -12829, 1000000, 530507, 1000000, 50537, 1000000, \ |
|---|
| 64 | 5181, 1000000, 48183, 1000000, 245014, 1000000 |
|---|
| 65 | |
|---|
| 66 | #define cam_CalibrationIlluminant1 1 // Daylight |
|---|
| 67 | // cropping |
|---|
| 68 | #define CAM_JPEG_WIDTH 3648 |
|---|
| 69 | #define CAM_JPEG_HEIGHT 2736 |
|---|
| 70 | #define CAM_ACTIVE_AREA_X1 6 |
|---|
| 71 | #define CAM_ACTIVE_AREA_Y1 12 |
|---|
| 72 | #define CAM_ACTIVE_AREA_X2 3690 |
|---|
| 73 | #define CAM_ACTIVE_AREA_Y2 2772 |
|---|
| 74 | |
|---|
| 75 | // camera name |
|---|
| 76 | #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData to get camera name |
|---|
| 77 | #undef CAM_SENSOR_BITS_PER_PIXEL |
|---|
| 78 | #define CAM_SENSOR_BITS_PER_PIXEL 12 |
|---|
| 79 | |
|---|
| 80 | #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1 // enable workaround for camera crash at startup when opening the conf / font files |
|---|
| 81 | // see http://chdk.setepontos.com/index.php?topic=6179.0 |
|---|
| 82 | |
|---|
| 83 | #define CAM_DATE_FOLDER_NAMING 0x100 //Value found in the last function, which is called in GetImageFolder. (first compare) |
|---|
| 84 | |
|---|
| 85 | #define CAM_DRIVE_MODE_FROM_TIMER_MODE // use PROPCASE_TIMER_MODE to check for multiple shot custom timer. |
|---|
| 86 | // Used to enabled bracketing in custom timer, required on many recent cameras |
|---|
| 87 | // see http://chdk.setepontos.com/index.php/topic,3994.405.html |
|---|
| 88 | |
|---|
| 89 | //---------------------------------------------------------- |
|---|
