source: branches/release-1_0/platform/d10/platform_camera.h @ 2798

// Camera - d10 - platform_camera.h

// This file contains the various settings values specific to the d10 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                     2
    #define CAM_DRYOS                       1

    #define CAM_RAW_ROWPIX                  4104    // 12 MP 12bpp
    #define CAM_RAW_ROWS                    3048    // from " CrwAddress %lx, CrwSize H %ld V %ld\r"

    #undef  CAM_HAS_ERASE_BUTTON
    #undef  CAM_USE_ZOOM_FOR_MF
    #define CAM_MULTIPART                   1
    #undef  CAM_HAS_IRIS_DIAPHRAGM
    #define CAM_HAS_ND_FILTER               1

    // TODO
    //  #define CAM_CAN_SD_OVER_NOT_IN_MF       1       // Camera allows subject distance (focus) override when not in manual focus mode
    //  #define CAM_CAN_SD_OVERRIDE             1       // Camera allows to do subject distance override

    // long shutter is acutally user TV, may work ?
    #undef  CAM_HAS_USER_TV_MODES
    #define CAM_SHOW_OSD_IN_SHOOT_MENU      1

    // TODO this doesn't seem to be working
    #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1

    #undef  CAM_VIDEO_CONTROL
    #define CAM_VIDEO_QUALITY_ONLY          1

    #define CAM_EXT_TV_RANGE                1

    #undef  CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT                0x40000000

    #undef  CAM_BITMAP_PALETTE
    // OK looks similar to ixus100 based on forum posts
    #define CAM_BITMAP_PALETTE              5

    #define CAM_QUALITY_OVERRIDE            1
    #undef CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL       12

    #define CAM_STARTUP_CRASH_FILE_OPEN_FIX 1

    #define CAM_DNG_LENS_INFO               { 62,10, 186,10, 28,10, 49,10 } // See comments in camera.h

    #define cam_CFAPattern 0x01000201 // Green  Blue  Red  Green 

    #define CAM_COLORMATRIX1                        \
      14052, 10000,   -5229, 10000,   -1156, 10000, \
      -1325, 10000,    9420, 10000,    2252, 10000, \
       -498, 10000,    1957, 10000,    4116, 10000
    #define cam_CalibrationIlluminant1      21      // D65

    // cropping OK
    #define CAM_JPEG_WIDTH                  4000
    #define CAM_JPEG_HEIGHT                 3000
    #define CAM_ACTIVE_AREA_X1              0       // some data all the way to left, normal 8 ?
    #define CAM_ACTIVE_AREA_Y1              10
    #define CAM_ACTIVE_AREA_X2              4072    // or 4024
    #define CAM_ACTIVE_AREA_Y2              3040    // or 3041 or 3020

    // camera name OK
    #define PARAM_CAMERA_NAME               4       // parameter number for GetParameterData

    //aspect correction
    #undef  CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION      1       //camera uses the modified graphics primitives to map screens an viewports to buffers more sized

    #define CAM_ZEBRA_ASPECT_ADJUST         1

    #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1   // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
                                                // Used to enabled bracketing in custom timer, required on many recent cameras
                                                // see http://chdk.setepontos.com/index.php/topic,3994.405.html

    #define CAM_FIRMWARE_MEMINFO            1   // Use 'GetMemInfo' to get free memory size.
//----------------------------------------------------------